Introducing our premium grade 4-rail PVC horse fence, the perfect combination of strength, durability, and style. This fence kit is specifically designed to provide a superior alternative to traditional wooden fence kits, with many added benefits.
At the heart of this fence kit are our 88 inch x 5 inch thick posts, which provide unmatched strength and stability. Approximately 28 inches of the post go below ground and the remaining 60 inches go above ground, providing ample height to keep horses safe and secure. Each post comes with a cap included, adding to the fence's attractive and elegant appearance.
The rails of the fence are 8 feet long, 5.5 inches wide, and 1.5 inches thick, providing unparalleled strength and support for the entire fence system. Unlike wooden fence kits, our premium grade PVC horse fence requires no painting or staining and won't rot or mildew over time. The fence is also UV stabilized for decades of use outdoors, ensuring that it won't fade or show any signs of deterioration.
The 4-Rail PVC Gate Kit we offer comes with a 36-inch wide by 55-inch tall gate, complete with hinges, latch, and a pair of 87-inch aluminum post inserts. These aluminum inserts are designed to be installed inside the two adjacent posts, providing reinforcement to bear the gate's weight and ensuring durability for long-term, frequent use. We recommend beginning with the installation of the gate posts and gate, as this will help you determine the optimal positioning for the remaining fence posts in your setup.
Our fence kit is designed to be an attractive and strong barrier for horse paddocks, farms, and garden areas. It provides a level of durability that is unmatched by wooden fence kits, and it is manufactured to withstand extreme hot or cold climates.
Finally, our premium grade 4-rail PVC horse fence comes with a 10-year warranty, giving you peace of mind and ensuring that you can enjoy the benefits of this fence for many years to come. The fence is easy to install, with posts installed approximately 28 inches below ground and then typically installed in concrete. Rails easily clip into posts and are notched to stay in place. With its strength, durability, and style, our fence kit is the perfect choice for those looking for a superior alternative to wooden fence kits.
Installation Instructions:
Step 1: If using a gate, it is best to assemble your gate first as the gate width and location will determine the layout of the rest of your posts.
Step 2: Install line stakes and run a string line. The string line should be positioned on the side of the posts and be very tight. Use a tape measure and mark the location for each post. Posts should be installed 8 foot apart on center to accommodate the 8ft rails. Note that rails can be cut shorter if necessary.
Step 3: Remove the string line, leaving the stakes, and dig the post holes. If installing with concrete, 5" posts will need a 12" diameter hole (If installing with Fast2K dig an 8” diameter hole). The recommended depth of the holes is 28" - 36" depending on how tall you want the fence.
Step 4: Re-attach the string line to the stakes and place a post in each hole. Use the string line to ensure the fence line is straight as you set the posts.
Step 5: Finally, mix the concrete and fill the hole around the post with concrete to 3" below ground level, ensuring that the post is level and plumb. It is best to use two 80 lb. bags of Quickcrete for each 5" post. We recommend setting posts in concrete one post at a time so corrections are easier to make.
